Installing damper:
1) Place correct threaded adapter stud into centering bolt and pulling nut as shown in the drawing.
2) Place damper on the crank as straight as possible.
3) Place pulling plate with the bearing facing away from damper.
4) Turn pulling nut to install.

Removing damper:
1) Place correct threaded adapter stud into centering bolt and pulling nut as shown in the drawing.
2) Screw into the end of the crank.
3) Place the pulling plate with the bearing towards the crank.
4) Install 2 or 3 bolts( as required) thru the pulling plate and into the damper.
5) While holding the centering bolt with a wrench, turn the pulling nut to remove the damper.

TECH SUPPORT
CAT POWER ENGINE PARTS, INC.